I hava installed ME-3600X-24FS-M license 10GEUpgrade on version 15.5(3)S5.
#copy tftp flash:/
Address or name of remote host []? 192.168.14.6
Source filename []? FCW2122H24C_20171220091220.lic
Accessing tftp://192.168.14.6/FCW2122H24C_20171220091220.lic...
Loading FCW2122H24C_20171220091220.lic from 192.168.14.6 (via GigabitEthernet0): !
[OK - 3318 bytes]
3318 bytes copied in 0.040 secs (82950 bytes/sec)
#dir
Directory of flash:/
2 -rwx 220 Dec 19 2017 09:31:26 -03:00 vlan.dat
3 -rwx 11427 Dec 18 2017 18:33:07 -03:00 config.text
4 -rwx 5 Dec 18 2017 18:33:07 -03:00 private-config.text
5 drwx 512 Dec 19 2017 09:09:18 -03:00 me360x-universalk9-mz.155-3.S5
7 -rwx 2072 Dec 18 2017 18:33:07 -03:00 multiple-fs
8 -rwx 3318 Dec 21 2017 15:01:13 -03:00 FCW2122H24C_20171220091220.lic
57931776 bytes total (26341376 bytes free)
#license install flash:/FCW2122H24C_20171220091220.lic
Installing licenses from "flash:/FCW2122H24C_20171220091220.lic"
Installing...Feature:AdvancedMetroIPAccess...Failed:
% Error: Duplicate license
Installing...Feature:10GEUpgrade...Failed:
% Error: Duplicate license
Installing...Feature:10GEUpgrade...Successful:Supported
1/3 licenses were successfully installed
2/3 licenses were existing licenses
0/3 licenses were failed to install
#sh license
Index 1 Feature: AdvancedMetroIPAccess
Period left: Life time
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium
Index 2 Feature: MetroIPAccess
Index 3 Feature: 10GEUpgrade
Period left: Life time
License Type: Permanent
License State: Active, Not in Use
License Count: Non-Counted
License Priority: Medium
#sh license detail
Index: 1 Feature: 10GEUpgrade Version: 1.0
License Type: Permanent
License State: Active, Not in Use
License Count: Non-Counted
License Priority: Medium
Store Index: 2
Store Name: Primary License Storage
Index: 2 Feature: 10GEUpgrade Version: 1.0
License Type: Permanent
License State: Inactive
License Count: Non-Counted
License Priority: Medium
Store Index: 0
Store Name: Primary License Storage
Index: 3 Feature: 10GEUpgrade Version: 1.0
License Type: Evaluation
License State: Inactive
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
Period used: 0 minute 0 second
License Count: Non-Counted
License Priority: None
Store Index: 1
Store Name: Built-In License Storage
Index: 4 Feature: AdvancedMetroIPAccess Version: 1.0
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium
Store Index: 1
Store Name: Primary License Storage
Index: 5 Feature: AdvancedMetroIPAccess Version: 1.0
License Type: Evaluation
License State: Inactive
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
Period used: 0 minute 0 second
License Count: Non-Counted
License Priority: None
Store Index: 0
Store Name: Built-In License Storage
#sh license status
License Type Supported
permanent Non-expiring node locked license
extension Expiring node locked license
evaluation Expiring non node locked license
evalRightToUse Right to use evaluation non node locked license
rightToUse Right to use non node locked license
License Operation Supported
install Install license
clear Clear license
annotate Comment license
save Save license
revoke Revoke license
Device status
Device Credential type: IMAGE
Device Credential Verification: PASS
Rehost Type: DC_OR_IC
#sh license feature
Feature name Enforcement Evaluation Subscription Enabled RightToUse
AdvancedMetroIPAccess yes yes no yes no
MetroIPAccess no no no no no
10GEUpgrade yes yes no no no
#license accept end user agreement
PLEASE READ THE FOLLOWING TERMS CAREFULLY. INSTALLING THE LICENSE OR
LICENSE KEY PROVIDED FOR ANY CISCO PRODUCT FEATURE OR USING SUCH
PRODUCT FEATURE CONSTITUTES YOUR FULL ACCEPTANCE OF THE FOLLOWING
TERMS. YOU MUST NOT PROCEED FURTHER IF YOU ARE NOT WILLING TO BE BOUND
BY ALL THE TERMS SET FORTH HEREIN.
Use of this product feature requires an additional license from Cisco,
together with an additional payment. You may use this product feature
on an evaluation basis, without payment to Cisco, for 60 days. Your use
of the product, including during the 60 day evaluation period, is
subject to the Cisco end user license agreement
http://www.cisco.com/en/US/docs/general/warranty/English/EU1KEN_.html
If you use the product feature beyond the 60 day evaluation period, you
must submit the appropriate payment to Cisco for the license. After the
60 day evaluation period, your use of the product feature will be
governed solely by the Cisco end user license agreement (link above),
together with any supplements relating to such product feature. The
above applies even if the evaluation license is not automatically
terminated and you do not receive any notice of the expiration of the
evaluation period. It is your responsibility to determine when the
evaluation period is complete and you are required to make payment to
Cisco for your use of the product feature beyond the evaluation period.
Your acceptance of this agreement for the software features on one
product shall be deemed your acceptance with respect to all such
software on all Cisco products you purchase which includes the same
software. (The foregoing notwithstanding, you must purchase a license
for each software feature you use past the 60 days evaluation period,
so that if you enable a software feature on 1000 devices, you must
purchase 1000 licenses for use past the 60 day evaluation period.)
Activation of the software command line interface will be evidence of
your acceptance of this agreement.
ACCEPT? (yes/[no]): yes
#sh license feature
Feature name Enforcement Evaluation Subscription Enabled RightToUse
AdvancedMetroIPAccess yes yes no yes no
MetroIPAccess no no no no no
10GEUpgrade yes yes no no no
#reload
#sh license feature
Feature name Enforcement Evaluation Subscription Enabled RightToUse
AdvancedMetroIPAccess yes yes no yes no
MetroIPAccess no no no no no
10GEUpgrade yes yes no no no
The question is: Why Enable is still no ?
