02-13-2012 12:58 PM - edited 03-04-2019 03:15 PM
I'm trying to diagnose a problem between an IAD 2431 (12.4(24)T6) and a 7206VXR (12.2(33)SRD4) where I see this in my logs on the IAD, repeating over and over...
Feb 13 15:42:13.573 EST: Mu101 MLP: Lost fragment 397A (all links out of sequence)
Feb 13 15:42:13.729 EST: Mu101 MLP: Lost fragment 3982 (all links out of sequence)
Feb 13 15:42:15.766 EST: Mu101 MLP: Lost fragment 3988 (all links out of sequence)
Feb 13 15:42:15.922 EST: Mu101 MLP: Lost fragment 3990 (all links out of sequence)
Feb 13 15:42:17.774 EST: Mu101 MLP: Lost fragment 3996 (all links out of sequence)
Feb 13 15:42:20.474 EST: Mu101 MLP: Lost fragment timeout, seq 399C
Feb 13 15:42:21.498 EST: Mu101 MLP: Lost fragment timeout, seq 399E
Feb 13 15:42:22.030 EST: Mu101 MLP: Lost fragment 39A0 (all links out of sequence)
Feb 13 15:42:22.394 EST: Mu101 MLP: Lost fragment 39A6 (all links out of sequence)
Feb 13 15:42:25.182 EST: Mu101 MLP: Lost fragment 39B6 (all links out of sequence)
Feb 13 15:42:26.766 EST: Mu101 MLP: Lost fragment 39BE (all links out of sequence)
Feb 13 15:42:28.682 EST: Mu101 MLP: Lost fragment 39C4 (all links out of sequence)
Feb 13 15:42:30.770 EST: Mu101 MLP: Lost fragment 39CA (all links out of sequence)
Feb 13 15:42:33.022 EST: Mu101 MLP: Lost fragment 39D0 (all links out of sequence)
Feb 13 15:42:35.018 EST: Mu101 MLP: Lost fragment 39D4 (all links out of sequence)
Feb 13 15:42:37.066 EST: Mu101 MLP: Lost fragment 39DA (all links out of sequence)
Feb 13 15:42:39.102 EST: Mu101 MLP: Lost fragment 39E0 (all links out of sequence)
Feb 13 15:42:41.978 EST: Mu101 MLP: Lost fragment timeout, seq 39EC
Feb 13 15:42:42.958 EST: Mu101 MLP: Lost fragment 39EE (all links out of sequence)
Feb 13 15:42:43.982 EST: Mu101 MLP: Lost fragment 39F6 (all links out of sequence)
Feb 13 15:42:45.082 EST: Mu101 MLP: Lost fragment timeout, seq 39FE
Feb 13 15:42:45.466 EST: Mu101 MLP: Lost fragment 3A00 (all links out of sequence)
Feb 13 15:42:46.470 EST: Mu101 MLP: Lost fragment 3A04 (all links out of sequence)
Feb 13 15:42:49.210 EST: Mu101 MLP: Lost fragment timeout, seq 3A0E
Feb 13 15:42:50.234 EST: Mu101 MLP: Lost fragment timeout, seq 3A10
Feb 13 15:42:50.450 EST: Mu101 MLP: Lost fragment 3A12 (all links out of sequence)
Feb 13 15:42:51.474 EST: Mu101 MLP: Lost fragment 3A1A (all links out of sequence)
Feb 13 15:42:53.482 EST: Mu101 MLP: Lost fragment 3A26 (all links out of sequence)
Feb 13 15:42:53.942 EST: Mu101 MLP: Lost fragment 3A30 (all links out of sequence)
Feb 13 15:42:56.150 EST: Mu101 MLP: Lost fragment 3A3E (all links out of sequence)
Feb 13 15:42:58.874 EST: Mu101 MLP: Lost fragment timeout, seq 3A44
Everything I can find with my google-foo references MLPPPoFR or MLPPPoA, but I'm doing neither... just straight MLPPP. VWIC-2MFT-T1 on the IAD,
PA-2CT3 on the 7206.
IAD Config:
----------------
interface Multilink101
ip address <removed>
no ip redirects
no cdp enable
ppp multilink
ppp multilink group 101
ppp multilink fragment disable
max-reserved-bandwidth 99
!
interface Serial1/0:1
no ip address
encapsulation ppp
ppp multilink
ppp multilink group 101
max-reserved-bandwidth 99
!
interface Serial1/1:1
no ip address
encapsulation ppp
ppp multilink
ppp multilink group 101
max-reserved-bandwidth 99
7206 Config:
------------------
interface Multilink14
ip address <removed>
no ip redirects
ppp multilink
ppp multilink group 14
ppp multilink fragment disable
no clns route-cache
!
interface Serial2/1/9:0
no ip address
encapsulation ppp
ppp multilink
ppp multilink group 14
no clns route-cache
!
interface Serial2/1/10:0
no ip address
encapsulation ppp
ppp multilink
ppp multilink group 14
no clns route-cache
end
02-14-2012 06:54 AM
Try to lower the max-reserved-bandwith value, or have a look on this paper it explain how to configure on T1 link.
http://www.cisco.com/en/US/tech/tk39/tk48/technologies_tech_note09186a00800fe2c1.shtml
Hope it helps
Eugen
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide