MDT is required when your cloud require to distinguish and isolate multicast traffic from core multicast traffic.mainly used for Lyaer 3 VPN customers in MPLS Core network.
MDT default is required to identfy traffic for a specific customer X using a multicast group So the multicast tree will be careated and handled by multicast core network accordingly.
Customer X is using layer 3 vpn service from an Service provider and would like to have unicast and multicast services using the same VPN(VRF)
In order to handle this multicast traffic Service provider will create a default group (126.96.36.199) So with respect to this group one multicast tree will be created and Core routers will forward traffic accordingly.
MDT default group actualy used by Service provider to handle VRF customer s multicast traffic
Customer will have to handle its multicast traffic and there will be another Multicast tree according to customer specific group configurations
Hi!Need to find network devices but not want to open SSH and do show cdp nei, show lldp nei and then need to sh cdp nei gig0/1 det and more.... ?Now You can do from PowerShell.\cdplldp.exe -v v3 -u <SNMPv3 user> -a SHA -w <SNMPv3 authkey> -pp ...
Community Live slides- Getting to know Cisco SD-WAN
(Live event - formerly known as Webcast- Wednesday December 11, 2019 at 10 am Pacific/ 1 pm Eastern / 7 pm Paris)
This event had place on Wednesday 11th, December 2019 at 10hrs PDT
To participate in this event, please use the button to ask your questions
This topic is a chance to clarify your questions about the Cisco Software-Defined WAN (SD-WAN) solution, its historical roo...
Starting from NFVIS 3.12 versions, the deploy option does not depict all the SR-IOV VFs(Virtual Functions) available in a physical interface. This change is introduced as (i) the number of VFs of ENCS platform on LANs side is increased to 24 and (ii) the...