cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
309
Views
0
Helpful
1
Replies

Multilink frame and frame/ATM internetworking?

dtangent
Level 1
Level 1

Is there any official specification that anyone knows regarding MFR and frame/ATM internetworking compatibility?

In other words, if you have a CPE running MFR to a FR/ATM switch, and from that switch you have an ATM connection to another CPE, will that work? Regular FRF.8 works fine, but since one of the requirements with MFR is that the remote site needs to terminate the MFR traffic, I am assuming it would actually have to be done on the FRF.8 capable switch in this case. I am unsure whether a FRF.8 capable switch can do it.

1 Reply 1

mmellet
Level 3
Level 3

Check the below URL having the information about the Multilink frame and frame/ATM internetworking.

http://www.cisco.com/en/US/products/hw/switches/ps525/prod_release_note09186a0080080d03.html

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco