Have a 2811 with an existing E1 circuit on WIC-1T via PE CDU/DSU:
interface Serial0/0/0
ip address xxx.xxx.xxx.xxx
Router also has an unconfigured VWIC-2MFT-T1/E1 installed. Need to create a 3-circuit multilink bundle. Is that possible? Something like this:
card type e1 0 1
multilink bundle-name authenticated
controller E1 0/1/0
framing NO-CRC4
channel-group 0 timeslots 1-31
controller E1 0/1/1
framing NO-CRC4
channel-group 0 timeslots 1-31
interface Multilink1
ip address xxx.xxx.xxx.xxx
ppp multilink
ppp multilink group 1
interface Serial0/0/0
description Existing WIC-1T
no ip address
encapsulation ppp
ppp multilink
ppp multilink group 1
interface Serial0/1/0:0
description VWIC-2MFT-E1/T1 interface 0
no ip address
encapsulation ppp
ppp multilink
ppp multilink group 1
interface Serial0/1/1:0
description VWIC-2MFT-E1/T1 interface 1
no ip address
encapsulation ppp
ppp multilink
ppp multilink group 1
Am I missing anything here?
Thanks!
Thanks!
