cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
501
Views
0
Helpful
1
Replies

Multilink PPP Latency

fjmendonca
Level 1
Level 1

I have one Cisco 7206VXR (NPE-G1) router with PA-MC-E3 module installed.

In this module I have configured four channels as unframed, or either, 2MB each. To creaate one link of 8MB we use one Multilink PPP that adds these four channels.

What is the latency of this interface Multilink?

1 Accepted Solution

Accepted Solutions

wdrootz
Level 4
Level 4

This module contains information about reducing latency and jitter for real-time traffic on your network. One Cisco mechanism for reducing latency and jitter for real-time traffic is Multilink PPP (MLP), also known as Multilink. This module contains conceptual information about Multilink and describes how Multilink PPP can be used with network peers to reduce latency and jitter for real-time traffic on your network.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cg/hqos_c/part30/ch05/qslfiovw.htm

View solution in original post

1 Reply 1

wdrootz
Level 4
Level 4

This module contains information about reducing latency and jitter for real-time traffic on your network. One Cisco mechanism for reducing latency and jitter for real-time traffic is Multilink PPP (MLP), also known as Multilink. This module contains conceptual information about Multilink and describes how Multilink PPP can be used with network peers to reduce latency and jitter for real-time traffic on your network.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cg/hqos_c/part30/ch05/qslfiovw.htm