NAT ACL

[Rupesh Kashyap]

I am working on PIX.My inside host(10.32.0.64) is going to External address for NTP. I have opened ACL traffic from Inside for ntp on Inside interface. My question is, should I open any ACL from Ex NTP to 200.200.200.0? Please help.

global (outside) 7 200.200.200.0 netmask 255.255.255.0

nat (inside) 7 10.32.0.64 255.255.255.255

[Sureshdank]

Hi Rupesh,

Please confirm what is the NAT IP i.e public IP you are using. As per to your above config it shows your NAT IP is 200.200.200.0.

Regards,

Suresh Kumar