New to IOS, need help with 1250 Access point.

[Thach1969Ngo]

Hello everyone,

I'm kind of a "newbie" on enterprise level networking. I need some help getting my 1250 up and running. I have no clue on how to configure it though IOS. I need to know how I can activate it's Radios and configure an IP for it so that I can use the Express set up. I'm trying to use this as a high quality home network access point.

Any and all help appriciated.

[Jon Marshall · Accepted solution]

Thach1969Ngo wrote:
Hello everyone,
I'm kind of a "newbie" on enterprise level networking. I need some help getting my 1250 up and running. I have no clue on how to configure it though IOS. I need to know how I can activate it's Radios and configure an IP for it so that I can use the Express set up. I'm trying to use this as a high quality home network access point.
Any and all help appriciated.

Start with this doc which covers assigning an IP and using Express Setup -

http://www.cisco.com/en/US/customer/docs/wireless/access_point/12.4_10b_JA/configuration/guide/scg12410b-chap4-first.html

One other point. If you get stuck or need additional help you would be better posting to the Wireless forums.

Jon

[Thach1969Ngo]

Hmm... Thanks for the response, however, it returned a "Forbidden File" page.

[Jon Marshall · Accepted solution]

Thach1969Ngo wrote:
Hmm... Thanks for the response, however, it returned a "Forbidden File" page.

Think you need a Cisco account to access but you should be able to. Try the long way round ie.

From the Cisco homepage - www.cisco.com

1) click on "Products and Services" (Along the top)

2) Click on "Wireless"  - give page time to load

3) Click on "All Products" tab

4) Scroll down to your AP and click on it

5) On the next page in the "Support" box click on "Configure"

6) Click on "Configuration Guide"

7) On next page there is only one link - click on it and it is the "Getting started chapter" you want.

Jon