Hi!
I have Nexus 3064 and Juniper MX960 devices.
Have the same configuration on Nexus:
interface Ethernet1/48
description access-switch-S2326
switchport mode dot1q-tunnel
switchport access vlan 303
speed 1000
interface port-channel1
description -=MX-960=-
switchport mode dot1q-tunnel
speed 1000
Config on Juniper:
set interfaces ae1 description -=Cisco=-
set interfaces ae1 flexible-vlan-tagging
set interfaces ae1 mtu 9192
set interfaces ae1 encapsulation flexible-ethernet-services
set interfaces ae1 aggregated-ether-options minimum-links 1
set interfaces ae1 aggregated-ether-options link-speed 1g
set interfaces ae1 unit 303 vlan-tags outer 303
set interfaces ae1 unit 303 vlan-tags inner 750
set interfaces ae1 unit 303 family inet address 10.110.0.30/24
But this dont work. I have MAC address from Ethernet1/48, but not have any MAC from Juniper MX.
Where is my mistake??