02-20-2007 10:10 PM - edited 03-03-2019 03:50 PM
This is a new setup we are doing:
Although SHOW DIAG sees the NM-4B-S/T module installed in slot 2 of the router, we are unable to config the interfaces, because the interfaces are not seen by teh router.
IOS version is 12.3(21) and image name is c3640-js-mz.123-21.bin.
When we move the NM-4B-S/T to slot 3 it works fine. Assuming that slot 2 of this 3640 has a problem we tried another 3640 and again the same NM-4B-S/T in slot 2 of the second 3640 also shows the same symptom. I don't suspect the NM-4B-S/T module because it works fine in slot 3 of both routers.
What am I missing?
02-20-2007 11:47 PM
This might be some conflict with the NM-CE1B module, although I did not (yet) find a description of such an issue.
You may try to move the PRI-module to another slot to if this resolves the issue as well.
I am curious to your findings in this.
Regards,
Leo
02-21-2007 01:19 AM
For some reason, I have multiple 3660 deployed by my vendor 4 years ago with the NM-4B-S/T in slot 3. Well, the network engineer who deployed it already left. I'm also curious to your findings :)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide