04-15-2017 02:38 PM - edited 03-05-2019 08:21 AM
all interface are up but i can not connect to interne.
can you help please.
the below is my configurartion.
Router#sh run
Building configuration...
Current configuration : 2408 bytes
!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
!
crypto pki trustpoint TP-self-signed-4161185151
enrollment selfsigned
ip-address admission max-nodata-conns 3
subject-name cn=IOS-Self-Signed-Certificate-4161185151
revocation-check none
rsakeypair TP-self-signed-4161185151
!
!
ip cef
!
!
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.1.0 192.168.1.99
!
ip dhcp pool lan-pool
import all
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
!
!
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
!
multilink bundle-name authenticated
!
!
vtp domain SKYBB
vtp mode transparent
!
!
archive
log config
hidekeys
!
!
!
bridge irb
!
!
interface ATM0
no ip address
ip policy route-map voip
atm vc-per-vp 64
no atm ilmi-keepalive
pvc 0/38
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
dsl operating-mode auto
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface Dot11Radio0
no ip address
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
!
interface Dot11Radio0.1
encapsulation dot1Q 1 native
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
!
interface Vlan1
no ip address
bridge-group 1
!
interface Dialer0
ip address negotiated
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
dialer-group 1
fair-queue
no cdp enable
ppp authentication chap callin
ppp chap hostname ma@plusdsl.net
ppp chap password 0 rground1
ppp pap sent-username ma@plusdsl.net password 0 round1
ppp ipcp dns request
!
interface BVI1
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly
!
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer0
!
!
ip http server
ip http secure-server
ip nat inside source list any interface Dialer0 overload
!
ip access-list extended any
permit ip any any
!
!
!
!
!
control-plane
!
bridge 1 protocol ieee
bridge 1 route ip
!
line con 0
no modem enable
line aux 0
line vty 0 4
login
!
scheduler max-task-time 5000
end
04-16-2017 12:03 AM
Has Dialer0 managed to get an IP address ("show interface Dialer0")?
04-16-2017 02:54 PM
HI Philip
I managed to make it work with these commands
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.1.0 192.168.1.99
!
ip dhcp pool vlan1
import all
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
dns-server 212.159.13.49 212.159.13.50
lease 0 12
but the proplem i loose them when i reboot the router and i get these errors
import all
^
% Invalid input detected at '^' marker.
network 192.168.1.0 255.255.255.0
^
% Invalid input detected at '^' marker.
default-router 192.168.1.1
^
% Invalid input detected at '^' marker.
dns-server 212.159.13.49 212.159.13.50
^
% Invalid input detected at '^' marker.
lease 0 12
^
% Invalid input detected at '^' marker.
Press RETURN to get started!
can you help with this please ?
04-16-2017 08:29 PM
It sounds like you have a had IOS version on that router. If you have a Cisco maintenance contract like a SmartNet I would upgrade the IOS to something a bit more recent. 12.x code is getting pretty old now. 15.x is the mainstream now.
04-17-2017 02:26 AM
I have been using same configuration before and it was working.
thanks
04-16-2017 08:09 AM
Hello,
I have made a few adjustments to your configuration (in bold), can you try if you get it to work with these changes ?
Current configuration : 2408 bytes
!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
no aaa new-model
!
crypto pki trustpoint TP-self-signed-4161185151
enrollment selfsigned
ip-address admission max-nodata-conns 3
subject-name cn=IOS-Self-Signed-Certificate-4161185151
revocation-check none
rsakeypair TP-self-signed-4161185151
!
ip cef
!
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.1.0 192.168.1.99
!
ip dhcp pool lan-pool
import all
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
!
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
!
multilink bundle-name authenticated
!
vtp domain SKYBB
vtp mode transparent
!
archive
log config
hidekeys
!
bridge irb
!
interface ATM0
no ip address
ip policy route-map voip
atm vc-per-vp 64
no atm ilmi-keepalive
pvc 0/38
encapsulation aal5mux ppp dialer
pppoe-client dial-pool-number 1
!
dsl operating-mode auto
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface Dot11Radio0
no ip address
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
!
interface Dot11Radio0.1
encapsulation dot1Q 1 native
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
!
interface Vlan1
no ip address
bridge-group 1
!
interface Dialer0
ip address negotiated
ip mtu 1460
ip nat outside
ip virtual-reassembly
encapsulation ppp
ip tcp adjust-mss 1420
dialer pool 1
dialer-group 1
fair-queue
no cdp enable
ppp authentication chap callin
ppp chap hostname ma@plusdsl.net
ppp chap password 0 rground1
ppp pap sent-username ma@plusdsl.net password 0 round1
ppp ipcp dns request
!
interface BVI1
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1420
!
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer0
!
ip http server
ip http secure-server
!
route-map TO_ISP permit 10
match ip address any
match interface Dialer 0
!
ip nat inside source route-map TO_ISP interface Dialer0 overload
!
ip access-list extended any
permit ip 192.168.1.0 0.0.0.255 any
!
control-plane
!
bridge 1 protocol ieee
bridge 1 route ip
!
line con 0
no modem enable
line aux 0
line vty 0 4
login
!
scheduler max-task-time 5000
end
04-16-2017 02:49 PM
Hi george
I got erro with pppoe-client dial-pool-number 1 and did not work with the other adjustments.
I managed to make it work with these commands
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.1.0 192.168.1.99
!
ip dhcp pool vlan1
import all
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
dns-server 212.159.13.49 212.159.13.50
lease 0 12
but the proplem i loose them when i reboot the router and i get these errors
import all
^
% Invalid input detected at '^' marker.
network 192.168.1.0 255.255.255.0
^
% Invalid input detected at '^' marker.
default-router 192.168.1.1
^
% Invalid input detected at '^' marker.
dns-server 212.159.13.49 212.159.13.50
^
% Invalid input detected at '^' marker.
lease 0 12
^
% Invalid input detected at '^' marker.
Press RETURN to get started!
can you help with this please ?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide