nx-os hsrp track not running

[daniel k]

9504 # 1 HSRP Active Standby did not change when port 1/1 was not connected
Please tell me why.

-----------------------------------------------

9504#1

track 2 interface ethernet 1/1 line-protocol

interface vlan 20

hsrp 2

preempt

priority 110

timers 1 3

ip 10.10.10.5

track 2 decrement 20

9504#2 

interface vlan 20

hsrp 2

timers 1 3 

ip 10.10.10.5

[Seb Rupik · Accepted solution]

Hi there,

You need to have your standby router preempt once the priority value on the primary router goes to 90:

9504#2
!
int vlan 20
  hsrp 2
    preempt
!

cheers,

Seb.