Hi,
I did an internetwork where there is OSPF and RIP .
The problem is that R2 and R3 can not reach R5's loopbacks through the Frame Relay cloud. (see the configurations and the topology).
any idea?
To sum up:
R1:
-ASBR and ABR (areas 0 and 1)
-lo1: 1.1.1.1 (area 1)
-lo8:8.1.1.1
-lo9:9.1.1.1
-lo10:10.1.1.1
-lo11:11.1.1.1
-serial0/0:172.12.123.1 (area 0)
-fastethernet0/0: 15.1.1.1 (RIP)
R5:
-lo4:4.1.1.1
-lo5:5.1.1.1,
-lo6:6.1.1.1,
-lo7:7.1.1.1
-fastethernet0/0: 15.1.1.2 (RIP)
R2:
-lo2: 2.2.2.2 (area 2)
-serial0/0: 172.12.123.2 (area 0)
R3:
-lo3: 3.3.3.3 (area 3)
-serial0/0: 172.12.123.3 (area 0)