09-28-2022 11:15 PM
1. Make end to end connectivity.
2. we have one Backup Link also. My all connectivity go through primary link
From R4 to R6, it don't use backup link..
when you do traceroute from R4 to R6 then it travel from R4 to R1 to R2 to R3 to R5 to R6
This is standard communication.
But if any case to R1 or we have link down from r4
R1 to R2 or any other link then
comunication should be come through backup link.
means traceroute from r4 to r6 should be come through
r4 to r5 to r6
09-28-2022 11:36 PM - edited 09-29-2022 08:53 PM
Awesome and interesting article. Great things you’ve always shared with us. Thanks. Just continue composing this kind of post.
Fragomen Connect Portal
10-23-2022 05:39 AM
I admit, I have not been on this blog in a long time, however it was joy to find it again. It is such an important topic and ignored by so many, even professionals! I thank you for helping to make people more aware of these issues. Just great stuff as per usual! facebook
10-23-2022 11:03 AM
Hello
Looking at your topology you have posted i would say east/west traffic <r4<>r6> would default via R5 for the rip network, R5 is acting as ABR/ASBR, what you dont show is the R4<>R5 connection as to what ospf area (if any) they are attached to?
10-23-2022 11:26 AM
Hello
Looking at your topology you have posted i would say east/west traffic <r4<>r6> would default via R5 for the rip network, R5 is acting as ABR/ASBR, what you dont show is the R4<>R5 connection as to what ospf area (if any) they are attached to?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide