03-29-2017 01:53 PM - edited 03-05-2019 08:16 AM
Running OSPF over DMVPN on 4 spokes and 1 hub. everything is network type non broadcast and the spokes are all priority 0.
When running show ip ospf int br on the Hub i see the state on the Tunnel interface as DR, but on the Spokes I see DR Other.
I feel the spokes should be BDR? Or am I wrong?
03-29-2017 02:43 PM
Hi
If you have configured the spokes with priority 0, they will never be DR, BDR either, try to configure one of them with priority 254 then clear ip ospf process and you should see the BDR from other spokes. The DR should have 255 priority.
Please rate the comment if it is useful
:-)
03-29-2017 04:21 PM
Hi
With OSPF priority 0, the router won't participate to DR/BDR election that's why it's seen as DROTHER.
Thanks
PS: Please don't forget to rate and mark as correct answer if this answered your question
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide