09-07-2017 10:30 AM - edited 03-05-2019 09:06 AM
Hi Guys,
Good day!
Would like to ask this issue I've encountered, From Branch A they accessing route 10,11.0.X from External, We manipulated by adding metric from DC +100 and then from HQ is just the default one.
We tried turning off OSPF peer between HQ-ISSW to BranchA-CS02, So far the output is good and working accordingly. From Branch they're using the +100 toward to DC. But when we tried to revert turning up again OSPF peering between HQ and Branch, Traffic went to Branch to HQ using the default metric. Strange thing is route to 10.11.0.X is still using the higher metric..Which is not good.
This the only trace i get, We can see on "Wrong Path" that Branch still using path with +100 metric. Temporary solution we remove the 10.11.0.X in DC side so i will not be redistributed to OSPF. So in Branch A the only route toward to 10.11.X.X is Via HQ path.
Thank you
09-07-2017 12:04 PM
Hi
What happen is the link between branch and DC is down? are your still receiving the route?, could you please execute, show ip ospf database.
Thank you
09-07-2017 01:05 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide