Hi Guys,
So I was working an a PT to expand my knowledge on everything I'm currently learning in CCNA.
But ofcourse it's only configuring and not troubleshooting it is a little bit of a challenge as if I break it myself I know how to fix it.
So I was thinking that everybody breaks it and we can troubleshoot as everyone can just upload it back here or maybe expand it.
Tips on what to add or what is missing is also good I just want to expand my knowledge and be sure I'm not missing any important steps.
Screenshots and the PT itself is in the attachments.
A little bit about the packet tracer
the following routing protocols are configured
EIGRP
OSPF
RIP
Static route
All red cables are fiber cables
Core-S1 and Core-S2 are running an etherchannel and Destr-S1 and Destr-S2 are running an etherchannel
the following VLANS are configured:
VLAN 1: 192.168.0.0/24
VLAN 10: 192.168.10.0/24 (Printers)
VLAN 20: 192.168.20.0/24 (Servers)
VLAN 30: 192.168.30.0/24 (IT_dept)
VLAN 40: 192.168.40.0/24 (HR_dept)
VLAN 50: 192.168.50.0/24 (Marketing_dept)
DHCP server and default gateways are configured on Core-S1
VTP server is Core-S1 the rest are in client mode
Backup of the switches config are on the FTP server
DNS-server is configured to ping the switches on the hostname.
Haven't configured any password just for the ease of configuring everything
