cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1621
Views
0
Helpful
23
Replies

PBR on ME3600 vs sdm template

Karl Tremblay
Level 1
Level 1

Hello group !  

I need in a rush to run PBR on my cisco me3600(me360x-universalk9-mz.154-3.S1.bin) I did all config and it's not working, I think sdm is the cause of my issue, at first I was sdm "default" template, after some search I've seend on forums that pbr wont work on "default" template, so I changed sdm tempate to "ip", but it's still not working. Do I need to use a different sdm template ? but "defaut" and "ip" are the only available option I'm seeing on my 3600 , oh there's also "fpga" and I don't know what fpag option really is.  My current Liscence is "MetroIPAccess".  So question is, how could I get PBR working on my switch ?!

config :

(At first I had ACL match on route-map, but I've removed it to be more simple config at all..)

route-map lan_pbr_traffic permit 5
set ip next-hop 192.168.1.1
!

interface GigabitEthernet0/23
description to PC
no switchport
ip address 192.168.200.2 255.255.255.0
ip policy route-map lan_pbr_traffic
no snmp trap link-status

thanks to help !!

Karl T.

23 Replies 23

Yeap I remember you changed the SDM to ip




>> Marcar como útil o contestado, si la respuesta resolvió la duda, esto ayuda a futuras consultas de otros miembros de la comunidad. <<

Exact,, as below: (I tried with another ios...)

TESTKT_3600#sho sdm pref current
The current License is MetroIPAccess
The current template is "ip" template.

Template values:
number of mac table entries = 8000
number of ipv4 routes = 24000
number of ipv6 routes = 4000
number of routing groups = 1000
number of multicast groups = 1000
number of bridge domains = 4096
number of acl entries = 2000
number of MDT mroutes = 0
number of ipv6 acl entries = 1000

TESTKT_3600#sh ver | i bin
System image file is "flash:me360x-universalk9-mz.152-2.S.bin"
TESTKT_3600#

Hi

Thanks let me lab it, just a recommendation, the native vlan should not be used for access vlan or assigned to users, the native vlan should be used on the trunk interfaces only.

:-)




>> Marcar como útil o contestado, si la respuesta resolvió la duda, esto ayuda a futuras consultas de otros miembros de la comunidad. <<

Yes thanks :)

Is someone have an idea how make my me3600 be compatible with PBR ?

 

http://www.cisco.com/c/en/us/td/docs/switches/metro/me3600x_3800x/software/release/15-2_4_S/configuration/guide/3800x3600xscg/swpbr.html

cisco says :

Prerequisites for PBR

For Cisco ME 3600X , the PBR feature is supported with the application SDM template. For Cisco ME 3800X, this feature is supported with the scaled license.


Note The PBR feature does not work with the default template.

but not more information that that... ! From sdm "ip template" it's not working.  what should we do to run PBR on a 3600..what we need to do ?!

If someone know, please let me know !!

thanks :)

Hi Karl

Do you have an Advanced Metro IP access license or Metro IP? Or what license is installed on the device?

Investigating I found this link:

http://citeseerx.ist.psu.edu/viewdoc/download;jsessionid=0EBF543E9525D17ECA93536F757138EE?doi=10.1.1.649.4508&rep=rep1&type=pdf

Note The following templates are supported for the Advanced Metro IP Access license:

applications show applications template configuration

default show default template configuration

ip show ip template configuration

qos-ipv6 show ipv6-qos template configuration

scaled-ip-qos show scaled-ip-qos template configuration

http://www.cisco.com/c/en/us/td/docs/switches/metro/me3600x_3800x/software/release/15-5_1_S/configuration/guide/3800x3600xscg/swsdm.html




>> Marcar como útil o contestado, si la respuesta resolvió la duda, esto ayuda a futuras consultas de otros miembros de la comunidad. <<

Thanks Julio !  yes I have MetroIPAccess    as below :

License Level: MetroIPAccess
License Type: Permanent
Next reload license Level: MetroIPAccess

---

thanks for the link !

Hi my friend, 

Hope this info is useful:

Note The following templates are supported for the Advanced Metro IP Access license:

applications show applications template configuration

default show default template configuration

ip show ip template configuration

qos-ipv6 show ipv6-qos template configuration

scaled-ip-qos show scaled-ip-qos template configuration

●   The Metro IP Access license offers advanced QoS, Carrier Ethernet Layer 2 features, Ethernet OAM, Layer 3 features for advanced IP routing protocols, multi-VPN routing, and Forwarding Customer Edge (multi-VRF CE) capabilities.

   The Advanced Metro IP Access license adds the following capabilities to the METRO IP ACCESS image: MPLS, EoMPLS pseudowires, Virtual Private Lan Services (VPLS), MPLS traffic engineering, Fast Reroute (FRR), and MPLS VPN support.

http://www.cisco.com/c/en/us/products/collateral/switches/me-3600x-series-ethernet-access-switches/data_sheet_c78-601946.html




>> Marcar como útil o contestado, si la respuesta resolvió la duda, esto ayuda a futuras consultas de otros miembros de la comunidad. <<

sorry, I forgot the "not"




>> Marcar como útil o contestado, si la respuesta resolvió la duda, esto ayuda a futuras consultas de otros miembros de la comunidad. <<
Review Cisco Networking for a $25 gift card