We are running IWAN using APIC, I know that pfr is used to control what traffic goes over what link etc.
We run EIGRP on the branches and have by default a static route to the lan redistributed on the MPLS and the Internet router, the Internet router has a higher metric for this than the mpls so the primary path to the site is the MPLS.
however, how does pfr override this for certain traffic? does it inject static routes etc? or does it inject them using eigrp, the routes say p on them when I look at the table.
Cisco DNA Software Demo Series - Cisco ThousandEyesRegister nowWednesday, May 12, 202110:00 am Pacific Daylight Time(San Francisco, GMT-07:00)SaaS applications and cloud-based services are increasingly critical for on-campus users, but they can be challen...
New Cisco Champion Radio release on Cisco Smart Building SolutionsListen: https://smarturl.it/CCRS8E16Follow us: https://twitter.com/CiscoChampion Now more than ever, sustainable and flexible building designs are at the forefront of every develo...
DRAFT -- THIS DOCUMENT IS STILL IN DRAFT FORM
MACsec is IEEE standard 802.1AE. It was developed by the IEEE to compliment the 802.1X-2004 standard. MACsec was developed to allow authorized systems to connect and then encrypt data that is transmitt...
Today I'm going to talk about SD-wan including SD-WAN advanced lab ,, first thing let's take a small brief about the SD_WAN. What is SD-WAN? SD-WAN is Software define wide area network and SD-WAN is key part of the technology o...
Leopold Fisher, Cisco Meraki IoT specialist, will introduce you to new and innovative additions to the Meraki portfolio coming in April 2021.
Meraki Vision Session
MV smart camera range is getting big...