Dear All,
I had problem on Cisco Pix 506e, when i press button off,
and then press power it on.it show message below:
CISCO SYSTEMS PIX FIREWALL
Embedded BIOS Version 4.3.207 01/02/02 16:12:22.73
Compiled by morlee
32 MB RAM
PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 00 00 8086 7192 Host Bridge
00 07 00 8086 7110 ISA Bridge
00 07 01 8086 7111 IDE Controller
00 07 02 8086 7112 Serial Bus 9
00 07 03 8086 7113 PCI Bridge
00 0D 00 8086 1209 Ethernet 11
00 0E 00 8086 1209 Ethernet 10
---------------------------------------------
I try again ,and press Esc it show like this
CISCO SYSTEMS PIX FIREWALL
Embedded BIOS Version 4.3.207 01/02/02 16:12:22.73
Compiled by morlee
32 MB RAM
Testing mode menu:
1. Test floating point.
2. Test protected mode.
3. Exhaustive Test first 640k.
4. Exhaustive Test high memory.
*. Start all tests (Any key to stop tests).
C. Continue.
What's going on ? how can i fix it?
Best Regards,
Join
