Routing

Okay I am a novice when it comes to setting up bridging but I have been asked to help a friend who has his own mini ISP to create something that will work for him. Here is the network layout.there are 2 bridge-groupsBG1 contains 4 membersATM1/0.364...

Hi All,In the location I live routers such as 2522 and 4500 etc don't come up on auction very often so.....For my study purposes I am looking at linking multiple 2501 routers together to do the same function. I have lots of these available to me and ...

What are the main difference between this two terms:Bridging and Transperent Bridging ?

I would like to know before acquiring a Router 1800 series if is possible to stablish a VPN connection with 3com 3cr860-95 router. Thank you for its answer.

I want to build a frame relay switch by using multiple 2500 series routers, which are interconnected with its ethernet interface on simple LAN segment. Is it possible? If yes, where can I find more info?

Please, can anyone help me to know how to calculate MBS regarding SCR and PCR ?Thanks,Cleber

Hi ,Can you plz tell me about Line out errors and Passcode voilation errors in T1.Thanking you

hi all,After I added below command in ASA, the telnet session seeems success but there is just a cursor prompt without other configure i can see. any command i missed ?interface Management 0/0 nameif managementtelnet 192.168.1.0 255.255.255.0 telne...

We have 7507 box with dual power supply. We are facing some strange issue with this device, If we unplug and plug power cable, sometime it worked fine with redundant power supply but sometime it goes into crash. We have changed both the power supply,...

Dear AllNow I had problem, I want to ask you and help me to solve this problem:At my office has 3 branches, one branch in city (HQ) and two branches in town, so two branch connect to city by lease line and we has equipments: Rad modem 52, wic-1T,V.35...

I am looking for the model of router which is able to answer to this specification.(see diagram)We would like to implement a VPN between two sites, based on 2 ADSL lines connected to Internet. If the mail line (ADSL) is done, the router we start the ...

Hi, This is the problem with my setup where I am connected with IXIA through 2851 router ( gig0/0.224 , vlan 224 ) and there are 3 catalyst switches between the IXIA and 2851 . I am getting arp entry for IXIA at router end and Vice Versa but when i...

Hi everybody we have too many servers in our office. we want to have 1 ip with load balancing for example for 2 application servers . so, i\our goal is if we call this ip address, the load balancer divide the request between these servers. I think SL...

Hi every bodyHow many EIGRP AS numbers could be defined simultaniously in a router (7206) ?Aparently more than 30 AS is not possible .Tanx

In the EIGRP redistribution process, why exactly is the route to null 0 created? I rate all responses.