Port Forward to an IP

[Manuel Nin]

Hi. Please, help me to do this. I have a Cisco router, I want to do this:

1) Forward ALL incoming traffic via Dialer1 on port 8080 to the LAN IP 192.168.1.23 port 8080

2) Forward ALL others incoming traffic via Dialer to the LAN IP 192.168.1.24 (192.168.1.24 Is a Firewall device)

I'm using Dialer1 overload.

Please write the access list down.

__
Manuel

[Federico Coto Fajardo]

Hi Manuel,

I don't have a router to try but what about:

ip nat inside source static tcp 192.168.1.23 8080 interface Dialer1 8080

ip nat inside source static 192.168.1.24 interface Dialer1

Be careful not to lose access to the router (if you're logged via the Dialer1 interface).

Federico.