Solved: Power Connection on Cisco C899G LTE

radiomean · ‎02-17-2021

Hi, I have just bought a Cisco C899G LTE, with the 4 pin square power plug. The router does not have a power brick with it - does anyone know what the pin-out is so I connect a temporary PSU?

Cheers, Bill

marce1000 · ‎02-18-2021

- https://www.cisco.com/c/en/us/td/docs/routers/access/800/hardware/installation/guide/800HIG.pdf

Have a look at : Figure 3-33

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

View solution in original post

marce1000 · ‎02-18-2021

- https://www.cisco.com/c/en/us/td/docs/routers/access/800/hardware/installation/guide/800HIG.pdf

Have a look at : Figure 3-33

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

radiomean · ‎02-18-2021

Thanks! I have also found a manual for the IR829 which gave me the same information, plus 'ignition noise suppression'!

Cheers...

Edit 1 - the router is running now, so the pin out is certainly correct!

Edit 2 - pages 57 and 58 of the following document show the pinout...

https://www.cisco.com/c/en/us/td/docs/routers/access/800/829/hardware/install/guide/b_IR829-HIG.pdf