04-23-2013 07:04 AM - edited 03-04-2019 07:41 PM
username R3 password CHAP
int s0/0/1
encapsulation ppp
ppp authentication chap
ip address 10.254.0.118 255.255.255.252
ip nat inside
clock rate 64000
no shutdown
exit
--------------------------------
username R1 password CHAP
int s0/0/1
encapsulation ppp
ppp authentication chap
ip address 10.254.0.118 255.255.255.252
ip nat inside
clock rate 64000
no shutdown
exit
could you help me out? im trying ppp encapsulation with chap authentication
However the routers cannot send packets to each other?
packet tracer file attached.
04-23-2013 07:05 AM
http://www.2shared.com/file/GoCWzz8v/WAN.html
packet tracer file online.
04-23-2013 07:18 AM
Hi,
get rid of nat inside on one of the router and on r1: user r3 and on r3: user r1
then shut/no shut one of the interfaces on one router and your interface should become up/up.
Regards
Alain
Don't forget to rate helpful posts.
04-23-2013 07:26 AM
I dont really understand...something like this?
username R3 password CHAP //change this to username R1?
int s0/0/1
encapsulation ppp
ppp authentication chap
ip address 10.254.0.118 255.255.255.252
clock rate 64000
no shutdown
exit
//got rid of the ip nat inside
--------------------------------
username R1 password CHAP //change this to username R3?
int s0/0/1
encapsulation ppp
ppp authentication chap
ip address 10.254.0.118 255.255.255.252
ip nat inside
clock rate 64000
no shutdown
exit
04-23-2013 09:54 AM
Hi,
yes on R1 declare user R3 and on R3 declare user R1
Regards
Alain
Don't forget to rate helpful posts.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide