Re: Problem for removed Flexible Netflow on 3850

hugoDelande09733 · ‎06-17-2020

Hello everyone and thank you in advance for your help

I am trying to edit/modify/delete the current configuration of Flexible Netflow V. 9 on an cisco catalyst 3850. But I can't delete it :
% Flow monitor: "Flow Record" is in use. Remove from all interfaces before deleting

However when I use the command "show flow monitor", no flow monitor is applied

my version of IOS is as follows: 16.6.5.

Has anyone ever encountered this bug and knows a solution?

If you can help me

thank you in advance

marce1000 · ‎06-17-2020

- Make sure tto use the no ip flow monitor command to remove a flow monitor from all of the interfaces to which you have applied it before , then check again.

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

hugoDelande09733 · ‎06-17-2020

Hi !

Yes i did it for all the interfaces.

But, the message is still here :

% Flow Monitor: 'ipv4_netflow_input' is in use. Remove from all interfaces before deleting

And, when I use "show flow interface", there is nothing.

this is the 2nd time this has happened to me, but I don't find a solution ...