Hi evryone
I have a problem in my Cisco 1841 in Virtual-Access Interface all interfaces is UP Except Virtual Access is Down ,
ROUTER#show ip int brief
Interface IP-Address OK? Method Status Protocol
FastEthernet0/0 41.208.109.241 YES NVRAM up up
FastEthernet0/1 unassigned YES NVRAM administratively down down
ATM0/0/0 unassigned YES NVRAM up up
ATM0/0/1 unassigned YES NVRAM up up
Virtual-Access1 unassigned YES unset up up
Virtual-Access2 unassigned YES unset up down
Virtual-Access3 unassigned YES unset up up
Dialer0 X.X.X.X YES NVRAM up up
Dialer1 X.X.X.X YES NVRAM up up
This is my ATM and Dialer Config .
!
interface ATM0/0/0
no ip address
load-interval 600
no atm ilmi-keepalive
pvc 8/36
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
!
interface ATM0/0/1
no ip address
load-interval 600
no atm ilmi-keepalive
pvc 8/36
encapsulation aal5mux ppp dialer
dialer pool-member 2
!
interface Dialer0
ip address x.x.x.x 255.255.255.254
no ip redirects
no ip unreachables
no ip proxy-arp
encapsulation ppp
dialer pool 1
dialer-group 1
!
interface Dialer1
ip address xx.x.x.x 255.255.255.254
no ip redirects
no ip unreachables
no ip proxy-arp
encapsulation ppp
dialer pool 2
dialer-group 2
when i want recover the virtual access to up ,should i do shut & no shut to the ATM interface.
My question is:
What is the cause of the problem, and how I can solve this issue?
thanks alot
