Hi
When I try to copy ios to one flash in router 2801, I receive the message of of insufficient memory, and have the follow out in the next command:
Router01#sh flash
No files on device
----------------------------------
----------------------------------
Router01#dir
Directory of flash:/
No files in directory
64016384 bytes total (0 bytes free)
-----------------------------------
----------------------------------
Router01#show flash: all
No files on device
-----------------------
-----------------------
Router01#sh log
Syslog logging: enabled (11 messages dropped, 4 messages rate-limited,
0 flushes, 0 overruns, xml disabled, filtering disabled)
Console logging: level debugging, 43 messages logged, xml disabled,
filtering disabled
Monitor logging: level debugging, 0 messages logged, xml disabled,
filtering disabled
Buffer logging: disabled, xml disabled,
filtering disabled
Logging Exception size (4096 bytes)
Count and timestamp logging messages: disabled
No active filter modules.
Trap logging: level informational, 72 message lines logged
------------------------
------------------------
******** ATA Flash Card Geometry/Format Info ********
ATA CARD GEOMETRY
Number of Heads: 8
Number of Cylinders 490
Sectors per Track 32
Sector Size 512
Total Sectors 125440
ATA CARD FORMAT
Number of FAT Sectors 62
Sectors Per Cluster 8
Number of Clusters 15629
Number of Data Sectors 125300
Base Root Sector 232
Base FAT Sector 108
Base Data Sector 264
ATA MONLIB INFO
Image Monlib size = 51064
Disk monlib size = NA
Name = NA
Monlib end sector = NA
Monlib Start sector = NA
Monlib updated by = NA
Monlib version = NA
---------------------
---------------------
Router01#sh ver
Cisco IOS Software, 2801 Software (C2801-SPSERVICESK9-M), Version 12.3(11)T7, RE
LEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Sat 30-Jul-05 09:08 by dchih
ROM: System Bootstrap, Version 12.3(8r)T8, RELEASE SOFTWARE (fc1)
Router01 uptime is 10 weeks, 3 days, 5 hours, 40 minutes
System returned to ROM by power-on
System image file is "flash:c2801-spservicesk9-mz.123-11.T7.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Cisco 2801 (revision 5.0) with 234496K/27648K bytes of memory.
Processor board ID FTX0941Y0E8
2 FastEthernet interfaces
1 Serial(sync/async) interface
1 DSP, 8 Voice resources
DRAM configuration is 64 bits wide with parity disabled.
191K bytes of NVRAM.
62720K bytes of ATA CompactFlash (Read/Write)
Configuration register is 0x2102
What i cand do?
The flash show empty
