cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
760
Views
0
Helpful
2
Replies

Proper EIGRP Configuration

mccmhtac1
Level 1
Level 1

I have a hybrid environment and I will do my best to explain:

OPTEMAN: 3 routers connected via a private subnet (/29) over the OPTEMAN: Site A, Site B, and HQ. Site A is a 3560 that is the gateway for two subnets: siteA1 and siteA2. SiteB is a 2621, and HQ is a 6509 w/ MFSC.

HQ also connects to 4 other sites via MPLS: SiteC, SiteD, SiteE, and Site F.

HQ has the server subnet, Internet connection, and connection to other services via MPLS.

I have basic EIGRP  setup on HQ, SiteA, and SiteB. So far only siteA and HQ are updating each other. Not sure why. I am looking for the best practice example of how I should setup my enterprise EIGRP. I currently use static routes between the sites. I would prefer to be able to setup EIGRP in parallel, the remove the static routes.

Thanks

2 Replies 2

ajay chauhan
Level 7
Level 7

Brian,

would be better if you post one diagram.

Thanks

Ajay

Review Cisco Networking for a $25 gift card