Hi! I have a central office (with 2821) and 3 remote sites. Remote sites connected to center trought GRE with IPSEC. Now I want to guarante some bandwitch to computers in one remote site.
How can I configure 2821 to guarante 2Mb bandwitch outgoing traffic for hosts in RM-1 (192.168.1.0)?
2821:
crypto map VPN 10 ipsec-isakmp
set peer 172.16.0.2
match add TO-192.168.1.0
!
inter tunn0
descr =To-RM-1=
ip add 10.0.0.1 255.255.255.252
tunn sour gig0/0
tunn dest 172.16.0.2
ip nat inside
!
inter tunn1
descr =To-RM-2=
ip add 10.0.0.5 255.255.255.252
tunn sour gig0/0
tunn dest 172.16.0.3
!
inter tunn2
descr =To-RM-3=
ip add 10.0.0.9 255.255.255.252
tunn sour gig0/0
tunn dest 172.16.0.4
!
inter gig0/0
descr =To-Outside=
ip add 172.16.0.1 255.255.255.0
ip nat outside
crypto map VPN
!
inter gig0/1
descr =To-Inside=
ip add 192.168.0.1 255.255.255.0
!
ip nat inside source list TO-NAT inter gig0/0 over
ip route 192.168.1.0 255.255.255.0 tunn0
ip route 192.168.2.0 255.255.255.0 tunn1
ip route 192.168.3.0 255.255.255.0 tunn3
!
ip access ext TO-192.168.1.0
perm gre host 172.16.0.1 host 172.16.0.2
!
ip access ext TO-NAT
perm ip 192.168.0.0 0.0.0.255 any
perm ip 192.168.1.0 0.0.0.255 any
!
!
RM-1:
!
inter tunn0
ip add 10.0.0.2 255.255.255.252
tunn sour fast0/0
tunn dest 172.16.0.1
!
inter fast0/0
descr =To-Outside=
ip add 172.16.0.2 255.255.255.0
!
inter fast0/1
descr =To-Inside=
ip add 192.168.1.1 255.255.255.0
!
ip route 192.168.0.0 255.255.255.0 tunn0