05-26-2011 10:47 PM - edited 03-04-2019 12:32 PM
Was playing with qos pre-classify feature and found what:
class-map match-all CLASS
match protocol telnet
policy-map POLICY
class CLASS
set dscp af11
!
!
interface tunnel0
qos pre-classify
...
tunnel source x.x.x.x
!
!
interface f0/0
ip address x.x.x.x ...
service-policy output POLICY
!
doesn't do anything
changing class-map like:
ip access-list ext 100
permit tcp any any eq telnet
class-map match-all CLASS
match access-group 100
makes it all working.
Is it bug or feature?
Tried on Cisco IOS Software, 3600 Software (C3660-JK9O3S-M), Version 12.4(15)T11, RELEASE SOFTWARE (fc2)
on virtual router (GNS3)
Solved! Go to Solution.
05-27-2011 12:05 AM
Hi,
seems like a limitation of the technology: http://www.cisco.com/en/US/tech/tk543/tk757/technologies_tech_note09186a00800b3d15.shtml#sub2
Regards.
Alain.
05-27-2011 12:05 AM
Hi,
seems like a limitation of the technology: http://www.cisco.com/en/US/tech/tk543/tk757/technologies_tech_note09186a00800b3d15.shtml#sub2
Regards.
Alain.
05-27-2011 12:55 AM
Found it myself already, but thanks anyway.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide