Hello Expert
How can I do in order to both my 2 x N7KS learnt 10.226.80.0 route external type E1 via the same vlan 97.
FY, this route is inside the ospf database in both devices.
Type-5 AS External Link States
Link ID ADV Router Age Seq# Checksum Tag
10.226.80.0 10.226.0.1 40 0x80007fc9 0x1c37 10
For N7K1, it's ok , any issue see below
N7K1# sh ip route
10.226.80.0/24, ubest/mbest: 1/0
*via 10.255.254.3, Vlan97, [110/200], 3w0d, ospf-OSPF, type-1, tag 10
but for the N7K2, the route was learnt vi other vlan vlan 601, see below
# sh ip route 10.226.80.0
10.226.80.0/24, ubest/mbest: 8/0
*via 10.224.6.22, Vlan601, [110/400], 23:12:37, ospf-OSPF, type-1, tag 10
*via 10.224.6.23, Vlan601, [110/400], 23:12:37, ospf-OSPF, type-1, tag 10
*via 10.224.6.24, Vlan601, [110/400], 23:12:37, ospf-OSPF, type-1, tag 10
*via 10.224.6.25, Vlan601, [110/400], 23:12:37, ospf-OSPF, type-1, tag 10
*via 10.224.6.27, Vlan601, [110/400], 23:12:37, ospf-OSPF, type-1, tag 10
*via 10.224.6.29, Vlan601, [110/400], 23:12:37, ospf-OSPF, type-1, tag 10
Question,
I'd like the route via the same vlan, vlan97 as the first device.
thx
Alioune
