Reg:radius authentication

[dhanikonda]

Dear sir,

Iam having cisco 3560 48 port switch i configured that switch to radious authentication and it was working fine now we want to connect 2960 switch as client switch how can configure 2960 for radius authentication

iam attaching the l3 switch config

plz help me in this.

Regards

srini

[#2]

The following URLs will help you to configure 2960 for radius authentication:

http://www.cisco.com/en/US/docs/switches/lan/catalyst2960/software/release/12.2_25_fx/configuration/guide/swauthen.html#wp1091260

http://www.cisco.com/en/US/tech/tk59/technologies_tech_note09186a008009465c.shtml#t2

http://www/en/US/docs/switches/lan/catalyst2960/software/release/12.2_44_se/configuration/guide/swuncli.html