08-24-2007 06:29 AM - edited 03-03-2019 06:27 PM
How can I remove Cisco's banner from 2811 router?
banner login ^C
-----------------------------------------------------------------------
Cisco Router and Security Device Manager (SDM) is installed on this device.
This feature requires the one-time use of the username "cisco"
with the password "cisco". The default username and password have a privilege le
vel of 15.
Please change these publicly known initial credentials using SDM or the IOS CLI.
Here are the Cisco IOS commands.
username <myuser> privilege 15 secret 0 <mypassword>
no username cisco
Replace <myuser> and <mypassword> with the username and password you want to use
.
For more information about SDM please follow the instructions in the QUICK START
GUIDE for your router or go to http://www.cisco.com/go/sdm
-----------------------------------------------------------------------
^C
Solved! Go to Solution.
08-24-2007 06:47 AM
From the router prompt
router#
go into config mode
router#config t
and type no banner login
router(cnfg)#no banner login
HTH,
08-24-2007 06:47 AM
From the router prompt
router#
go into config mode
router#config t
and type no banner login
router(cnfg)#no banner login
HTH,
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: