03-08-2007 01:36 AM - edited 03-03-2019 04:05 PM
Hi,
Can I offset the routes learned from a particular source?
Could you explain how?
Regards
Gavin
03-08-2007 01:48 AM
i don't really understand ur question but if it is that u want to manipulate the metric its possible. so please be more specific conserning ur question.
03-08-2007 02:00 AM
Hi You can manipulate the metric of RIP v2 with the help of Offset-List command. syntax is as below: You can increase the metric of a route
offset-list {access-list-number | name} {in| out} offset [type number]
If u need more clarification do let me know.
It it helps do rate this post.
Thanks
Ninja
03-08-2007 02:01 AM
Hi Gavin
If i understand correctly yes you can offset routes learned from RIP.
Attached is a link covering this.
These commands apply to both RIPv1 and RIPv2.
HTH
Jon
03-08-2007 03:03 AM
My question was related to applying offset lists to routes learned from a particular source.
Say my RIP routes are learned from two different devices:
172.22.152.129
and
192.168.50.60
So these are my routing information sources.
Can I apply an offet to increase the metric learned via the 192.168.50.60 router?
Thanks
Gavin
03-08-2007 03:09 AM
Gavin
Yes, you can apply the offset list against an interface so you would apply it inbound on the interface that connects to the subnet that the 192.168.50.60 router is on.
HTH
Jon
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide