route over mpls Link

[Ibrahim Jamil]

Hi Guys

i have 2 routers 2811 interconnected together ,1 of these router running in circuit with 2 Mbps over Internet the 2nd one use MPLS Circuit with a bandwidth of 4Mbps,how configure the routing to route over the MPLS while IPSec act as standby

thanks

Ibrahim

[Marwan ALshawi]

One simple way is

To use a routing protocol or static route with small administrative distance over MPLs link to reach the remote network

Use another static route with higher administrative distance to reach same remote network over the IPSec tunnel/link

Hope this help

Sent from Cisco Technical Support iPhone App