Route Statement for 192.168 ?

[CiscoPurpleBelt]

Is it best practice to write statements for all your internal 192.168.X subnets or just put one 192.168.0.0 255.255.0.0 statement (e.g. 192.168.0.0 255.255.0.0 10.10.10.1)?

[Meheretab Mengistu]

If you have only one exit point (gateway), it is best practice to summarize the routes, or simply advertise default route.

HTH,

Meheretab

[CiscoPurpleBelt]

No there would be at least 2x gateways to send 192.168. traffic depending on the subnet.
So lets say I just had 1 gateway and I needed routes for 192.168.1.X - 192.168.254.X it is best to create the statement like this:
192.168.0.0 255.255.0.0 10.10.10.1