11-17-2009 07:11 AM - edited 03-04-2019 06:45 AM
Hi Guys a quick one, I have a problem with my router which is not saving configuration after I switch off. Where do I go ? Any clues
11-17-2009 07:24 AM
Chris,
Can you post sh ver?
Reza
11-20-2009 02:18 AM
The most common reason for a router not saving its config is that its config register has been set to ignore the startup config (typically a setting of 0x2142). The best way to check the setting is through the show version. If the config register is set to 0x2142, then use the config command config-register 0x2102 to fix it.
HTH
Rick
11-20-2009 10:24 PM
hi,
use erase nvram command and save it again
Kandasamy
04-18-2024 05:29 PM
My Prep for CCNA is going well after running the configs. Thank you @Richard Burts
04-18-2024 06:00 PM
You are welcome.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide