07-12-2010 01:55 AM - edited 03-04-2019 09:01 AM
On my 2801 I've got thi issue:
2801Voice_Gateway_MI#show flash:
%Error show flash: (No device available)
2801Voice_Gateway_MI#show version
Cisco IOS Software, 2801 Software (C2801-SPSERVICESK9-M), Version 12.4(6)T7, RELEASE SOFTWARE (fc5)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Thu 29-Mar-07 05:41 by khuie
ROM: System Bootstrap, Version 12.3(8r)T8, RELEASE SOFTWARE (fc1)
2801Voice_Gateway_MI uptime is 46 weeks, 1 hour, 18 minutes
System returned to ROM by power-on
System restarted at 09:38:26 CEST Mon Aug 24 2009
System image file is "flash:c2801-spservicesk9-mz.124-6.T7.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Cisco 2801 (revision 4.1) with 235520K/26624K bytes of memory.
Processor board ID FCZ091622WG
2 FastEthernet interfaces
4 ISDN Basic Rate interfaces
1 DSP, 8 Voice resources
DRAM configuration is 64 bits wide with parity disabled.
191K bytes of NVRAM.
Configuration register is 0x2102
2801Voice_Gateway_MI#show flash:
%Error show flash: (No device available)
Can you help me?
Solved! Go to Solution.
07-12-2010 03:18 PM
You sure the CF wasn't ejected by accident? Uptime of 46 weeks. Either the CF is faulty, the CF slot is faulty or someone pulling a prank and the CF was ejected. Manual intervention is the way to go.
07-12-2010 02:17 AM
hello ,
the problem seem happen like in simulation dynamic router , the real router ,i have no idea . you can try reboot the C2801.
or the flash card was broken .maybe.
SHF#show flash
System flash directory:
File Length Name/status
1 15194664 c2600-ik9o3s3-mz.122-15.T12.bin
[15194728 bytes used, 1058200 available, 16252928 total]
16384K bytes of processor board System flash (Read/Write)
SHF#show flash
System flash directory:
File Length Name/status
1 15194664 c2600-ik9o3s3-mz.122-15.T12.bin [deleted]
[15194728 bytes used, 1058200 available, 16252928 total]
16384K bytes of processor board System flash (Read/Write)
SHF#squeeze flash:
Squeeze operation may take a while. Continue? [confirm]
squeeze in progress... eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
Squeeze of flash complete
SHF#show flash
System flash directory:
No files in System flash
[0 bytes used, 16252928 available, 16252928 total]
16384K bytes of processor board System flash (Read/Write)
07-12-2010 05:53 AM
Hello,
From the show version output, it seems like the flash card is not recognized by the hardware. Most likely it is a bad flash card issue or it could be a bad slot on the router as well. If you have a spare flash (know to be good) card, please try it on the router. If that is also not recognized, I would suspect the router itselve. You might have to get the router replaced.
Hope this helps.
Regards,
NT
07-12-2010 03:18 PM
You sure the CF wasn't ejected by accident? Uptime of 46 weeks. Either the CF is faulty, the CF slot is faulty or someone pulling a prank and the CF was ejected. Manual intervention is the way to go.
07-19-2010 06:40 AM
I've changed the flash and now evwrything is ok
thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide