Router 2811

[farozezan]

I want to transmit data and voice from site A to site B using 2811. Can you suggest what type of interface card that I need to buy and it's config.

tq

[Leo Laohoo]

Hi Faroz,

Errr ... can you be more specific? What's your budget like?

[farozezan]

We have 2 nos of 2811 router and 2 nos of CAT3750E. Can it be done if I want to link 2 Pbx and also a Data Network in the same E1. If yes what type of interface I must buy. Eg :

Pbx--------2811---E1---2811-----Pbx

*both 3750E connected to ethernet port 2811 for data network.

[paolo bevilacqua]

I think you had asked this question already, before you was complaing that it was not working, now you want to know which interfaces to buy ???

[farozezan]

Actually, we've installed the VWIC-1MFT-E1 & WIC-2A card but failed. I just want the comfirmation which interface card is the best to link pbx and LAN. If HW is the problem then we can buy a new one.

[jjchen978]

hi,

you might want to get the e&m card for connecting to the pbx system.

http://www.cisco.com/en/US/solutions/collateral/ns340/ns517/ns477/ns296/data_sheet_c78_464185.pdf