Routing

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Labels

Forum Posts

i have two internet gatways, 7600 router , i want to add two GSR 12410 Gatways ,but i want to utilize the existing two 7600,please find attached and let me know how i can utilise the four gateways instead of replacing the 7600 with GSR and not utiliz...

saeedbakh by Level 1
  • 1472 Views
  • 10 replies
  • 0 Helpful votes

Hi Everybody,I am trying to assign privilege level 6 to my support staff, so that he can see the following output1. config t2. interface ser 0/0privilege configure level 6 interfaceprivilege exec level 6 configure terminalBut, the support user is abl...

Resolved! NAT Query

I have configured nat and when i do my h ip nat translations, it show nothing but there are hits on the statistics. what does this mean?DUT_3825#sh ip nat translations DUT_3825#sh ip nat staDUT_3825#sh ip nat statistics Total active translations: 0 (...

I am at a small location and we are changing interet providers from a DSL provider to a business class cable modem. With our old provider (I didn't cut this over yet), they gave us a AdTran Router which handles our voice and DSL (we dont manage it, ...

bchyka by Level 1
  • 594 Views
  • 3 replies
  • 0 Helpful votes

My DMVPN spoke router can PING the DMVPN hub, but it looks like the traffic is going over the Internet and not the GRE tunnel.COBOU27THBASELINE_RL01#ping 138.69.156.3Type escape sequence to abort.Sending 5, 100-byte ICMP Echos to 138.69.156.3, timeou...

visitor68 by Level 5
  • 1691 Views
  • 10 replies
  • 0 Helpful votes

Our company is currently providing cable internet. Our set up is , we have 2 ISP, connected to CISCO 1841, then to a cmts (cable modem termination system). Unfortunately, 2 isp's cant go live simultaneously and we have been experiencing latency consi...

I have a setup in which I have 2 servers talking to each other and those ports are the SPANned source ports. The destination port used to be have a sniffer connected and now there is nothing connected to the destination port. In such case what will h...

saimbt by Level 1
  • 1949 Views
  • 6 replies
  • 0 Helpful votes

I am having latency problems when trying to use MMORPG games. I have discover that the problem don't happen at all hours. I did a tracert at the time (daytime) of the problem (please check attached file traceroute1.txt) and discovered that it travels...

I have couple of vlans i am routing on our core network. Inter-vlan routing is enable for all vlans but i would like to isolate few of the vlans. I dont want any traffic routed between those vlans. is vrf the way forward? Can vrf completely isolate t...

I have a Cisco 876W router and would like some assistance to enable the router to connect to ISP using the ISDN interface as the WAN link. The IOS has been upgraded to c870-advipservicesk9-mz.124-15.T7.bin. I have attached the running-config file Th...