Router 2951 with Multilink ppp

[ddevecka]

We just fired up a new 2951 with 7-T-1's and the lantency is just horrible. We have called the telco and they say they see no errors, but when we ping and tracert we hot 1000ms to 3000ms to our MPLS network. Also when we hit the multilink serial MPLS connect we see the 1000 to 3000ms leg times. That interface it local to the router. I have copied out config as well.

Any help would be apperciated.

Dan          

[acampbell · Accepted solution]

Hi,

It is my understanding that Interleavining and fragmentation

should only be used on circuits less than 768K.

Try removing

!

interface Multilink 1

no ppp multilink interleave

no ppp multilink fragment disable

!

Regards,
Alex.
Please rate useful posts.

[ddevecka]

Ended up being a bad vwic port, but thaanks for the responce.