10-06-2012 03:24 AM - edited 03-04-2019 05:46 PM
Hi,
Our network is down, because of the problem in flash card. The router enters in ROMMON mode after restarting. Could anyone tell me the command to boot the router using the IOS stored in TFTP server. We are using 1841 router.
10-06-2012 04:28 AM
use tftpdnld
Here s the link for reference
use tftpdnld -r option if the flash is not usable
10-06-2012 04:35 AM
HI Sabari,
Do u want to copy IOS from tftp server ? if yes then please follow the below given steps:-
rommon1 > IP_ADDRESS=
rommon 2> IP_SUBNET_MASK=
rommon 3> DEFAULT_GATEWAY=
rommon 4> TFTP_SERVER=
rommon 5> TFTP_FILE= < address of the tftpfile i.e.IOS>
rommon 6> tftpdnld
then yes when it cisco reconfirms to check that you are sure
HTH
MJ
10-06-2012 04:38 AM
Hi Sabri,
If problem is in your flash card then check with you internal TAC team.
HTH
MJ
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: