Router suggestion

[harikrishna1991]

We are planned to upgrade our ILL bandwidth to around 600Mbps.
Whether Cisco ISR 4451 router support the above mentioned bandwidth.
Any other alternate models

[e.ciollaro]

Hi

it greatly depends on

• what is the router expected to do,
• if you mean 600Mbps full duplex (I mean 600Mbps inbound to outbound + 600Mbps outbound to inbound) or not,
• required scalability.

If the router is just routing packets I think you can use the 4451 otherwise  try to have a look to the following link to have an idea of performance Vs feature but remember to use these results just as a rule of thumb because the real throughput in your scenario could be different because it depends on the way the features are implemented, I mean: NAT is NAT but  you can configure a single static NAT ore  a large PAT architecture  http://miercom.com/pdf/reports/20150817.pdf

An alternative  is ASR 1001-X 

Hope this help,

enrico

[harikrishna1991]

Hi Enrico,

Thanks for your suggestion.

It will be working on Full duplex and used for Internet access of multiple location offices as a centralized gateway.

Throughput aggregation of 4351 in the cisco data sheet mention it can handle 1Gbps to 2 Gbps.

Whether the through put indicates the speed at which the port operates or the speed the port can handle the traffic.

Hari.

[Julio E. Moisa]

Hi

You can try this tool to select the proper router for your requirements:

http://3c3cc.com/c/dam/assets/prod/routers/cisco-router-selector/index.html

Please rate the comment if it is useful

:-)

[e.ciollaro]

Whether the through put indicates the speed at which the port operates or the speed the port can handle the traffic.

It increases the performance from base performance to 2 Gbps

Bye,

enrico

PS: please rate if useful

[Leo Laohoo]

Duplicate thread. 

Kindly post all response(s) into the main thread (HERE).