Hello Guys,
Please go through the attached Network diagram for the referrence.
In this scenario PC-2 & PC-3 have same IP Address. All the router are running eigrp routing protocol.
When i ping 25.1.1.2 from PC-1 to which PC ( 2 or 3) should ping.
what i have observerd that it ping any one of the PC. but on what basis the router decide or learns the 25.1.1.0 network as it is same for both R1 & R2.
if i shut a serial link between r1 and r2 it pings the other 25.1.1.0 network.
Please let me if any one of you have any idea.
Regards,
MAX