cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1070
Views
0
Helpful
4
Replies

RV325 site to site VPN

davidly94300
Level 1
Level 1

Hi,

I set up a site to site VPN between 2 RV325 with last firmware.

Both have same configuration.

I succeeded in creating VPN and the 2 RV325 are connected but I am unable to ping local ressources.

Site A cannot ping Site B 

Is something I do wrong ?

Thanks in advance for your help

David

4 Replies 4

davidly94300
Level 1
Level 1
In fact I upgradated My RV325 to the damned buggy firmware 1.3.1 (Thanks a lot CISCO Team !) see this post : https://supportforums.cisco.com/discussion/12941951/rv320-firmware-13110-no-release-notes It's UNACCEPTABLE !!!!

Hi Davidly,

Did you resolved this issue? what actions did you  took? Im having the exact same problem with my warehouse.

Thanks

Hi Raz,

I resetted all RV325 to factory settings then I downgraded to firmware 1.2.1 and re done all settings.

VPN is still buggy but less more than with 1.3.1. 

see that post :

https://supportforums.cisco.com/discussion/12941951/rv320-firmware-13110-no-release-notes

Thanks David, I'll try that and let you know the results.

Review Cisco Networking for a $25 gift card