cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
328
Views
0
Helpful
1
Replies

Segment Routing ECMP on IOS XRv 6.1.3 not working

Hi All, 

Hope you have a good day. 

I'm testing Segment Routing in Eve-NG using IOS XRv 6.1.3.

I'm trying to test the ECMP-aware shortest path on the same metric to the destination and it doesn't work. If there are two paths to choose, it only chooses one. 

Do I need to configure to get ECMP or in-built?

Thanks in advance. 

 

 

1 REPLY 1
pigallo
Cisco Employee


@htainlynnaung199694856 wrote:

Hi All, 

Hope you have a good day. 

I'm testing Segment Routing in Eve-NG using IOS XRv 6.1.3.

I'm trying to test the ECMP-aware shortest path on the same metric to the destination and it doesn't work. If there are two paths to choose, it only chooses one. 

Do I need to configure to get ECMP or in-built?

Thanks in advance. 

 

 



Hello.

SR is natively ready for ECMP so you don't need to configure anything to benefit from the feature.
I'm not 100% sure though if  IOS-XRv fully supports SR features. You should try to test it under XRv9000 vm at least, if you have no real hardware available.


Best regards,