10-24-2005 09:51 AM - edited 03-03-2019 10:48 AM
Hi,
I want to setup 4 Cisco routers(3 2500s, and 1 2600) in a lab environment and have the following questions:
1- The 2500 routers have 56K DSU/CSU modules in each one of the them and T1-DSU/CSU module in one of them, what type of cables do I need to use to connect all of these routers?
2- Do I need to do anything when cofiguring the Serial interfaces?
Your response is very much appreciated.
Thanks,
sK
10-24-2005 10:43 AM
You first need to have an idea on how you want to connect your routers. To connect two routers on the 56K DSU/CSU port you need a crossover cable 1-7, 2-8, 7-1, 8-1
10-24-2005 11:11 AM
This is just a simple learing lab. I would like to setup the routers as follows:
Router1--LAB_A s0(56K DSU/CSU) to connect to Router2--LAB_B s0(T1 DSU-CSU). And Router2--LAB_B s1(56K DSU/CSU) to connect to Router3--LAB(56K DSU/CSU).
This is it! Thanks in advance.
sK
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide