show bfd neighbors details

[amin.amor]

Hi,

show bfd neighbors details

what the  min/max/avg means? (I assume this is the delay between two bfd peers)

I was not able to find cisco document that explain the: show bfd neighbors details

Rx Count: 51505568, Rx Interval (ms) min/max/avg: 1/250/90 last: 20 ms ago

Tx Count: 51511863, Tx Interval (ms) min/max/avg: 1/252/90 last: 8 ms ago

[Vivek Ganapathi]

Those counts are basically the control packets transmitted and received in 8ms and 20ms respectively.

[amin.amor]

Hi,

Thanks for your reply. Do you know any document that explains these values?

If BFD is configured as below:

BFD interval 100 min_rx 100 multi 3

Show BFD detail:

Rx Count: 51505568, Rx Interval (ms) min/max/avg: 1/250/90 last: 20 ms ago

Tx Count: 51511863, Tx Interval (ms) min/max/avg: 1/252/90 last: 8 ms ago

Based on the max value, at least two consecutive BFD packets are lost. I´m not sure if this is correct? I´m not able to find document that explain those values.