cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
24050
Views
0
Helpful
3
Replies

show running-config full

gglynn
Level 1
Level 1

Can someone please tell me what the point of the "full" option to the "show running-config" command is, and what sort of information (specifically) might be hidden if you don't use this option when issuing the command? The IOS documentation doesn't say.

3 Replies 3

mohammedmahmoud
Level 11
Level 11

Hi,

The full keyword is the default option for the command, this makes, "show run" = "show run full", you can find below other details:

R6#show running-config ?

brief configuration without certificate data

class-map Show class-map information

full full configuration

interface Show interface configuration

linenum Display line numbers in output

map-class Show map class information

policy-map Show policy-map information

view View options

| Output modifiers

R6#show running-config in

R6#show running-config interface f0/0

Building configuration...

Current configuration : 122 bytes

!

interface FastEthernet0/0

ip address 192.168.1.6 255.255.255.0

duplex auto

speed auto

end

R6#

http://www.cisco.com/en/US/docs/ios/12_4/cfg_fund/command/reference/cfn_10h.html#wp1032363

BR,

Mohammed Mahmoud.

Are you sure? Because most IOS commands don't have default options.

Hi,

Please always check the "Defaults" part in the DocCD for any command and you'll always find a default option, for example for this command i quote:

"The show running-config command without any arguments or keywords displays the entire contents of the running configuration file."

BR,

Mohammed Mahmoud.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: