08-08-2016 03:50 AM - edited 03-05-2019 04:27 AM
I need assistance with our Cisco 1921 router, the performance is extremely slow. We have to reboot the router ever now and then, and for some reason after the reboot the performance get better.
08-08-2016 04:03 AM
What is the speed of the WAN link?
08-08-2016 04:10 AM
See below:
Dialer1 is up, line protocol is up (spoofing)
Hardware is Unknown
Description: Internet ADSL Connection
Internet address is 84.252.240.78/32
MTU 1500 bytes, BW 56 Kbit/sec, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 255/255
Encapsulation PPP, LCP Closed, loopback not set
Keepalive set (10 sec)
DTR is pulsed for 1 seconds on reset
Interface is bound to Vi3
Last input never, output never, output hang never
Last clearing of "show interface" counters 5d17h
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: weighted fair
Output queue: 0/1000/64/0 (size/max total/threshold/drops)
Conversations 0/0/16 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
Available Bandwidth 42 kilobits/sec
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
46586777 packets input, 3920196096 bytes
42175464 packets output, 3980009007 bytes
08-08-2016 05:22 AM
Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages wha2tsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
An aDSL with only 56 Kbps? Is that correct?
Is this link use for Internet? Do you have a default route? If so, is next hop for the default an IP or is it the interface?
08-08-2016 06:14 AM
ATM0/0/0 is up, line protocol is up
Hardware is MPC ATMSAR, address is 7cad.74e1.7583 (bia 7cad.74e1.7583)
Description: Internet ADSL Connection
MTU 1600 bytes, sub MTU 1600, BW 1023 Kbit/sec, DLY 360 usec,
reliability 255/255, txload 9/255, rxload 255/255
Encapsulation ATM, loopback not set
Keepalive not supported
Encapsulation(s): AAL5
4 maximum active VCs, 1024 VCs per VP, 1 current VCCs
VC Auto Creation Disabled.
VC idle disconnect time: 300 seconds
Last input never, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 171693
Queueing strategy: Per VC Queueing
30 second input rate 1040000 bits/sec, 92 packets/sec
30 second output rate 38000 bits/sec, 66 packets/sec
47058637 packets input, 282454214 bytes, 0 no buffer
Received 0 broadcasts (0 IP multicasts)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
42338613 packets output, 3927546206 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 unknown protocol drops
0 output buffer failures, 0 output buffers swapped out
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide